- fix idmap_mount_tree_invalid test failure due to incorrect argument
- fix watchdog-test run leaving the watchdog timer enabled causing
system reboot. With this fix, the test disables the watchdog timer
when it gets terminated with SIGTERM, SIGKILL, and SIGQUIT in
addition to SIGINT
* tag 'linux_kselftest-fixes-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/watchdog-test: Fix system accidentally reset after watchdog-test
selftests/intel_pstate: check if cpupower is installed
selftests/intel_pstate: fix operand expected error
selftests/mount_setattr: fix idmap_mount_tree_invalid failed to run
Linus Torvalds [Sat, 2 Nov 2024 01:59:46 +0000 (15:59 -1000)]
Merge tag 'rust-fixes-6.12-3' of https://github.com/Rust-for-Linux/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Avoid build errors with old 'rustc's without LLVM patch version
(important since it impacts people that do not even enable Rust)
- Update LLVM version for 'HAVE_CFI_ICALL_NORMALIZE_INTEGERS' in
'depends on' condition (the fix was eventually backported rather
than land in LLVM 19)"
* tag 'rust-fixes-6.12-3' of https://github.com/Rust-for-Linux/linux:
cfi: tweak llvm version for HAVE_CFI_ICALL_NORMALIZE_INTEGERS
kbuild: rust: avoid errors with old `rustc`s without LLVM patch version
Linus Torvalds [Sat, 2 Nov 2024 01:44:23 +0000 (15:44 -1000)]
Merge tag 'pci-v6.12-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Enable device-specific ACS-like functionality even if the device
doesn't advertise an ACS capability, which got broken when adding
fancy ACS kernel parameter (Jason Gunthorpe)
* tag 'pci-v6.12-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix pci_enable_acs() support for the ACS quirks
Linus Torvalds [Sat, 2 Nov 2024 01:37:09 +0000 (15:37 -1000)]
Merge tag 'drm-fixes-2024-11-02' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular fixes pull, nothing too out of the ordinary, the mediatek
fixes came in a batch that I might have preferred a bit earlier but
all seem fine, otherwise regular xe/amdgpu and a few misc ones.
xe:
- Fix missing HPD interrupt enabling, bringing one PM refactor with it
- Workaround LNL GGTT invalidation not being visible to GuC
- Avoid getting jobs stuck without a protecting timeout
ivpu:
- Fix firewall IRQ handling
panthor:
- Fix firmware initialization wrt page sizes
- Fix handling and reporting of dead job groups
sched:
- Guarantee forward progress via WC_MEM_RECLAIM
tests:
- Fix memory leak in drm_display_mode_from_cea_vic()
mediatek:
- Fix degradation problem of alpha blending
- Fix color format MACROs in OVL
- Fix get efuse issue for MT8188 DPTX
- Fix potential NULL dereference in mtk_crtc_destroy()
- Correct dpi power-domains property
- Add split subschema property constraints"
* tag 'drm-fixes-2024-11-02' of https://gitlab.freedesktop.org/drm/kernel: (27 commits)
drm/xe: Don't short circuit TDR on jobs not started
drm/xe: Add mmio read before GGTT invalidate
drm/tests: hdmi: Fix memory leaks in drm_display_mode_from_cea_vic()
drm/connector: hdmi: Fix memory leak in drm_display_mode_from_cea_vic()
drm/tests: helpers: Add helper for drm_display_mode_from_cea_vic()
drm/panthor: Report group as timedout when we fail to properly suspend
drm/panthor: Fail job creation when the group is dead
drm/panthor: Fix firmware initialization on systems with a page size > 4k
accel/ivpu: Fix NOC firewall interrupt handling
drm/xe/display: Add missing HPD interrupt enabling during non-d3cold RPM resume
drm/xe/display: Separate the d3cold and non-d3cold runtime PM handling
drm/xe: Remove runtime argument from display s/r functions
drm/amdgpu/smu13: fix profile reporting
drm/amd/pm: Vangogh: Fix kernel memory out of bounds write
Revert "drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35"
drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM
drm/tegra: Fix NULL vs IS_ERR() check in probe()
dt-bindings: display: mediatek: split: add subschema property constraints
dt-bindings: display: mediatek: dpi: correct power-domains property
drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy()
...
Linus Torvalds [Sat, 2 Nov 2024 01:22:57 +0000 (15:22 -1000)]
Merge tag 'cxl-fixes-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Ira Weiny:
"The bulk of these fixes center around an initialization order bug
reported by Gregory Price and some additional fall out from the
debugging effort.
In summary, cxl_acpi and cxl_mem race and previously worked because of
a bus_rescan_devices() while testing without modules built in.
Unfortunately with modules built in the rescan would fail due to the
cxl_port driver being registered late via the build order. Furthermore
it was found bus_rescan_devices() did not guarantee a probe barrier
which CXL was expecting. Additional fixes to cxl-test and decoder
allocation came along as they were found in this debugging effort.
The other fixes are pretty minor but one affects trace point data seen
by user space.
Summary:
- Fix crashes when running with cxl-test code
- Fix Trace DRAM Event Record field decodes
- Fix module/built in initialization order errors
- Fix use after free on decoder shutdowns
- Fix out of order decoder allocations
- Improve cxl-test to better reflect real world systems"
* tag 'cxl-fixes-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/test: Improve init-order fidelity relative to real-world systems
cxl/port: Prevent out-of-order decoder allocation
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
cxl/acpi: Ensure ports ready at cxl_acpi_probe() return
cxl/port: Fix cxl_bus_rescan() vs bus_rescan_devices()
cxl/port: Fix CXL port initialization order when the subsystem is built-in
cxl/events: Fix Trace DRAM Event Record
cxl/core: Return error when cxl_endpoint_gather_bandwidth() handles a non-PCI device
Linus Torvalds [Fri, 1 Nov 2024 23:41:55 +0000 (13:41 -1000)]
Merge tag 'block-6.12-20241101' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fixup for a recent blk_rq_map_user_bvec() patch
- NVMe pull request via Keith:
- Spec compliant identification fix (Keith)
- Module parameter to enable backward compatibility on unusual
namespace formats (Keith)
- Target double free fix when using keys (Vitaliy)
- Passthrough command error handling fix (Keith)
* tag 'block-6.12-20241101' of git://git.kernel.dk/linux:
nvme: re-fix error-handling for io_uring nvme-passthrough
nvmet-auth: assign dh_key to NULL after kfree_sensitive
nvme: module parameter to disable pi with offsets
block: fix queue limits checks in blk_rq_map_user_bvec for real
nvme: enhance cns version checking
Linus Torvalds [Fri, 1 Nov 2024 23:38:01 +0000 (13:38 -1000)]
Merge tag 'io_uring-6.12-20241101' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
- Fix not honoring IOCB_NOWAIT for starting buffered writes in terms of
calling sb_start_write(), leading to a deadlock if someone is
attempting to freeze the file system with writes in progress, as each
side will end up waiting for the other to make progress.
* tag 'io_uring-6.12-20241101' of git://git.kernel.dk/linux:
io_uring/rw: fix missing NOWAIT check for O_DIRECT start write
Linus Torvalds [Fri, 1 Nov 2024 19:04:23 +0000 (09:04 -1000)]
Merge tag 'acpi-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Make the ACPI CPPC library use a raw spinlock for operations carried
out in scheduler context via the schedutil governor and the ACPI CPPC
cpufreq driver (Pierre Gondois)"
* tag 'acpi-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Make rmw_lock a raw_spin_lock
Dave Airlie [Fri, 1 Nov 2024 18:44:02 +0000 (04:44 +1000)]
Merge tag 'drm-xe-fixes-2024-10-31' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix missing HPD interrupt enabling, bringing one PM refactor with it
(Imre / Maarten)
- Workaround LNL GGTT invalidation not being visible to GuC
(Matthew Brost)
- Avoid getting jobs stuck without a protecting timeout (Matthew Brost)
Linus Torvalds [Fri, 1 Nov 2024 18:26:38 +0000 (08:26 -1000)]
Merge tag 'riscv-for-linus-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Avoid accessing the early boot ACPI tables via unsafe memory
attributes, which can result in incorrect ACPI table data appearing.
This can cause all sorts of bad behavior.
- Avoid compiler-inserted library calls in the VDSO.
- GCC+Rust builds have been disabled, to avoid issues related to ISA
string mismatched between the GCC and LLVM Rust implementations.
- The NX flag is now set in the EFI PE/COFF headers, which is necessary
for some distro GRUB versions to boot images.
- A fix to avoid leaking DT node reference counts on ACPI systems
during cache info parsing.
- CPU numbers are now printed as unsigned values during hotplug.
- A pair of build fixes for usused macros, which can trigger warnings
on some configurations.
* tag 'riscv-for-linus-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Remove duplicated GET_RM
riscv: Remove unused GENERATING_ASM_OFFSETS
riscv: Use '%u' to format the output of 'cpu'
riscv: Prevent a bad reference count on CPU nodes
riscv: efi: Set NX compat flag in PE/COFF header
RISC-V: disallow gcc + rust builds
riscv: Do not use fortify in early code
RISC-V: ACPI: fix early_ioremap to early_memremap
riscv: vdso: Prevent the compiler from inserting calls to memset()
Linus Torvalds [Fri, 1 Nov 2024 17:54:11 +0000 (07:54 -1000)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The important one is a change to the way in which we handle protection
keys around signal delivery so that we're more closely aligned with
the x86 behaviour, however there is also a revert of the previous fix
to disable software tag-based KASAN with GCC, since a workaround
materialised shortly afterwards.
I'd love to say we're done with 6.12, but we're aware of some
longstanding fpsimd register corruption issues that we're almost at
the bottom of resolving.
Summary:
- Fix handling of POR_EL0 during signal delivery so that pushing the
signal context doesn't fail based on the pkey configuration of the
interrupted context and align our user-visible behaviour with that
of x86.
- Fix a bogus pointer being passed to the CPU hotplug code from the
Arm SDEI driver.
- Re-enable software tag-based KASAN with GCC by using an alternative
implementation of '__no_sanitize_address'"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: signal: Improve POR_EL0 handling to avoid uaccess failures
firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state()
Revert "kasan: Disable Software Tag-Based KASAN with GCC"
kasan: Fix Software Tag-Based KASAN with GCC
Linus Torvalds [Fri, 1 Nov 2024 17:45:00 +0000 (07:45 -1000)]
Merge tag 'vfs-6.12-rc6.iomap' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull iomap fixes from Christian Brauner:
"Fixes for iomap to prevent data corruption bugs in the fallocate
unshare range implementation of fsdax and a small cleanup to turn
iomap_want_unshare_iter() into an inline function"
* tag 'vfs-6.12-rc6.iomap' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iomap: turn iomap_want_unshare_iter into an inline function
fsdax: dax_unshare_iter needs to copy entire blocks
fsdax: remove zeroing code from dax_unshare_iter
iomap: share iomap_unshare_iter predicate code with fsdax
xfs: don't allocate COW extents when unsharing a hole
Linus Torvalds [Fri, 1 Nov 2024 17:37:10 +0000 (07:37 -1000)]
Merge tag 'vfs-6.12-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull filesystem fixes from Christian Brauner:
"VFS:
- Fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP=y is set
- Add a get_tree_bdev_flags() helper that allows to modify e.g.,
whether errors are logged into the filesystem context during
superblock creation. This is used by erofs to fix a userspace
regression where an error is currently logged when its used on a
regular file which is an new allowed mode in erofs.
netfs:
- Fix the sysfs debug path in the documentation.
- Fix iov_iter_get_pages*() for folio queues by skipping the page
extracation if we're at the end of a folio.
afs:
- Fix moving subdirectories to different parent directory.
autofs:
- Fix handling of AUTOFS_DEV_IOCTL_TIMEOUT_CMD ioctl in
validate_dev_ioctl(). The actual ioctl number, not the ioctl
command needs to be checked for autofs"
* tag 'vfs-6.12-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP
autofs: fix thinko in validate_dev_ioctl()
iov_iter: Fix iov_iter_get_pages*() for folio_queue
afs: Fix missing subdir edit when renamed between parent dirs
doc: correcting the debug path for cachefiles
erofs: use get_tree_bdev_flags() to avoid misleading messages
fs/super.c: introduce get_tree_bdev_flags()
Linus Torvalds [Fri, 1 Nov 2024 17:31:47 +0000 (07:31 -1000)]
Merge tag 'for-6.12-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more stability fixes. There's one patch adding export of MIPS
cmpxchg helper, used in the error propagation fix.
- fix error propagation from split bios to the original btrfs bio
- fix merging of adjacent extents (normal operation, defragmentation)
- fix potential use after free after freeing btrfs device structures"
* tag 'for-6.12-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix defrag not merging contiguous extents due to merged extent maps
btrfs: fix extent map merging not happening for adjacent extents
btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids()
btrfs: fix error propagation of split bios
MIPS: export __cmpxchg_small()
Linus Torvalds [Fri, 1 Nov 2024 17:21:03 +0000 (07:21 -1000)]
Merge tag 'bcachefs-2024-10-31' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Various syzbot fixes, and the more notable ones:
- Fix for pointers in an extent overflowing the max (16) on a
filesystem with many devices: we were creating too many cached
copies when moving data around. Now, we only create at most one
cached copy if there's a promote target set.
Caching will be a bit broken for reflinked data until 6.13: I have
larger series queued up which significantly improves the plumbing
for data options down into the extent (bch_extent_rebalance) to fix
this.
- Fix for deadlock on -ENOSPC on tiny filesystems
Allocation from the partial open_bucket list wasn't correctly
accounting partial open_buckets as free: this fixes the main cause
of tests timing out in the automated tests"
* tag 'bcachefs-2024-10-31' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix NULL ptr dereference in btree_node_iter_and_journal_peek
bcachefs: fix possible null-ptr-deref in __bch2_ec_stripe_head_get()
bcachefs: Fix deadlock on -ENOSPC w.r.t. partial open buckets
bcachefs: Don't filter partial list buckets in open_buckets_to_text()
bcachefs: Don't keep tons of cached pointers around
bcachefs: init freespace inited bits to 0 in bch2_fs_initialize
bcachefs: Fix unhandled transaction restart in fallocate
bcachefs: Fix UAF in bch2_reconstruct_alloc()
bcachefs: fix null-ptr-deref in have_stripes()
bcachefs: fix shift oob in alloc_lru_idx_fragmentation
bcachefs: Fix invalid shift in validate_sb_layout()
Linus Torvalds [Fri, 1 Nov 2024 02:49:23 +0000 (16:49 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Put the QP netlink dump back in cxgb4, fixes a user visible
regression
- Don't change the rounding style in mlx5 for user provided rd_atomic
values
- Resolve a race in bnxt_re around the qp-handle table array
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: synchronize the qp-handle table array
RDMA/bnxt_re: Fix the usage of control path spin locks
RDMA/mlx5: Round max_rd_atomic/max_dest_rd_atomic up instead of down
RDMA/cxgb4: Dump vendor specific QP details
Linus Torvalds [Fri, 1 Nov 2024 00:56:19 +0000 (14:56 -1000)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix BPF verifier to force a checkpoint when the program's jump
history becomes too long (Eduard Zingerman)
- Add several fixes to the BPF bits iterator addressing issues like
memory leaks and overflow problems (Hou Tao)
- Fix an out-of-bounds write in trie_get_next_key (Byeonguk Jeong)
- Fix BPF test infra's LIVE_FRAME frame update after a page has been
recycled (Toke Høiland-Jørgensen)
- Fix BPF verifier and undo the 40-bytes extra stack space for
bpf_fastcall patterns due to various bugs (Eduard Zingerman)
- Fix a BPF sockmap race condition which could trigger a NULL pointer
dereference in sock_map_link_update_prog (Cong Wang)
- Fix tcp_bpf_recvmsg_parser to retrieve seq_copied from tcp_sk under
the socket lock (Jiayuan Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, test_run: Fix LIVE_FRAME frame update after a page has been recycled
selftests/bpf: Add three test cases for bits_iter
bpf: Use __u64 to save the bits in bits iterator
bpf: Check the validity of nr_words in bpf_iter_bits_new()
bpf: Add bpf_mem_alloc_check_size() helper
bpf: Free dynamically allocated bits in bpf_iter_bits_destroy()
bpf: disallow 40-bytes extra stack for bpf_fastcall patterns
selftests/bpf: Add test for trie_get_next_key()
bpf: Fix out-of-bounds write in trie_get_next_key()
selftests/bpf: Test with a very short loop
bpf: Force checkpoint when jmp history is too long
bpf: fix filed access without lock
sock_map: fix a NULL pointer dereference in sock_map_link_update_prog()
Linus Torvalds [Thu, 31 Oct 2024 22:39:58 +0000 (12:39 -1000)]
Merge tag 'net-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi, bluetooth and netfilter.
No known new regressions outstanding.
Current release - regressions:
- wifi: mt76: do not increase mcu skb refcount if retry is not
supported
Current release - new code bugs:
- wifi:
- rtw88: fix the RX aggregation in USB 3 mode
- mac80211: fix memory corruption bug in struct ieee80211_chanctx
Previous releases - regressions:
- sched:
- stop qdisc_tree_reduce_backlog on TC_H_ROOT
- sch_api: fix xa_insert() error path in tcf_block_get_ext()
- wifi:
- revert "wifi: iwlwifi: remove retry loops in start"
- cfg80211: clear wdev->cqm_config pointer on free
- netfilter: fix potential crash in nf_send_reset6()
- ip_tunnel: fix suspicious RCU usage warning in ip_tunnel_find()
- bluetooth: fix null-ptr-deref in hci_read_supported_codecs
- eth: mlxsw: add missing verification before pushing Tx header
- eth: hns3: fixed hclge_fetch_pf_reg accesses bar space out of
bounds issue
Previous releases - always broken:
- wifi: mac80211: do not pass a stopped vif to the driver in
.get_txpower
- netfilter: sanitize offset and length before calling skb_checksum()
- core:
- fix crash when config small gso_max_size/gso_ipv4_max_size
- skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
- mptcp: protect sched with rcu_read_lock
- eth: ice: fix crash on probe for DPLL enabled E810 LOM
- eth: macsec: fix use-after-free while sending the offloading packet
- eth: stmmac: fix unbalanced DMA map/unmap for non-paged SKB data
- eth: hns3: fix kernel crash when 1588 is sent on HIP08 devices
- eth: mtk_wed: fix path of MT7988 WO firmware"
* tag 'net-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
net: hns3: fix kernel crash when 1588 is sent on HIP08 devices
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
net: hns3: initialize reset_timer before hclgevf_misc_irq_init()
net: hns3: don't auto enable misc vector
net: hns3: Resolved the issue that the debugfs query result is inconsistent.
net: hns3: fix missing features due to dev->features configuration too early
net: hns3: fixed reset failure issues caused by the incorrect reset type
net: hns3: add sync command to sync io-pgtable
net: hns3: default enable tx bounce buffer when smmu enabled
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()
net: ethernet: mtk_wed: fix path of MT7988 WO firmware
selftests: forwarding: Add IPv6 GRE remote change tests
mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address
mlxsw: pci: Sync Rx buffers for device
mlxsw: pci: Sync Rx buffers for CPU
mlxsw: spectrum_ptp: Add missing verification before pushing Tx header
net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
netfilter: Fix use-after-free in get_info()
...
Dave Airlie [Thu, 31 Oct 2024 21:34:14 +0000 (07:34 +1000)]
Merge tag 'mediatek-drm-fixes-20241028' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
1. Fix degradation problem of alpha blending
2. Fix color format MACROs in OVL
3. Fix get efuse issue for MT8188 DPTX
4. Fix potential NULL dereference in mtk_crtc_destroy()
5. Correct dpi power-domains property
6. Add split subschema property constraints
Linus Torvalds [Thu, 31 Oct 2024 18:15:40 +0000 (08:15 -1000)]
Merge tag 'sound-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here we see slightly more commits than wished, but basically all are
small and mostly trivial fixes.
The only core change is the workaround for __counted_by() usage in
ASoC DAPM code, while the rest are device-specific fixes for Intel
Baytrail devices, Cirrus and wcd937x codecs, and HD-audio / USB-audio
devices"
* tag 'sound-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix headset mic on TUXEDO Stellaris 16 Gen6 mb1
ALSA: hda/realtek: Fix headset mic on TUXEDO Gemini 17 Gen3
ALSA: usb-audio: Add quirks for Dell WD19 dock
ASoC: codecs: wcd937x: relax the AUX PDM watchdog
ASoC: codecs: wcd937x: add missing LO Switch control
ASoC: dt-bindings: rockchip,rk3308-codec: add port property
ALSA: hda/realtek: Add subwoofer quirk for Infinix ZERO BOOK 13
ASoC: dapm: fix bounds checker error in dapm_widget_list_create
ASoC: Intel: sst: Fix used of uninitialized ctx to log an error
ASoC: cs42l51: Fix some error handling paths in cs42l51_probe()
ASoC: Intel: sst: Support LPE0F28 ACPI HID
ALSA: hda/realtek: Limit internal Mic boost on Dell platform
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet
ASoC: Intel: bytcr_rt5640: Add support for non ACPI instantiated codec
ASoC: codecs: rt5640: Always disable IRQs from rt5640_cancel_work()
Johan Hovold [Mon, 28 Oct 2024 12:49:58 +0000 (13:49 +0100)]
gpiolib: fix debugfs newline separators
The gpiolib debugfs interface exports a list of all gpio chips in a
system and the state of their pins.
The gpio chip sections are supposed to be separated by a newline
character, but a long-standing bug prevents the separator from
being included when output is generated in multiple sessions, making the
output inconsistent and hard to read.
Make sure to only suppress the newline separator at the beginning of the
file as intended.
Filipe Manana [Tue, 29 Oct 2024 15:18:45 +0000 (15:18 +0000)]
btrfs: fix defrag not merging contiguous extents due to merged extent maps
When running defrag (manual defrag) against a file that has extents that
are contiguous and we already have the respective extent maps loaded and
merged, we end up not defragging the range covered by those contiguous
extents. This happens when we have an extent map that was the result of
merging multiple extent maps for contiguous extents and the length of the
merged extent map is greater than or equals to the defrag threshold
length.
$ ./test.sh
Initial number of file extent items: 4
Number of file extent items after defrag with 128K threshold: 4
Number of file extent items after defrag with 256K threshold: 4
The 4 extents don't get merged because we have an extent map with a size
of 256K that is the result of merging the individual extent maps for each
of the four 64K extents and at defrag_lookup_extent() we have a value of
zero for the generation threshold ('newer_than' argument) since this is a
manual defrag. As a consequence we don't call defrag_get_extent() to get
an extent map representing a single file extent item in the inode's
subvolume tree, so we end up using the merged extent map at
defrag_collect_targets() and decide not to defrag.
Fix this by updating defrag_lookup_extent() to always discard extent maps
that were merged and call defrag_get_extent() regardless of the minimum
generation threshold ('newer_than' argument).
Filipe Manana [Mon, 28 Oct 2024 16:23:00 +0000 (16:23 +0000)]
btrfs: fix extent map merging not happening for adjacent extents
If we have 3 or more adjacent extents in a file, that is, consecutive file
extent items pointing to adjacent extents, within a contiguous file range
and compatible flags, we end up not merging all the extents into a single
extent map.
For example:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
After all the ordered extents complete we unpin the extent maps and try
to merge them, but instead of getting a single extent map we get two
because:
1) When the first ordered extent completes (file range [0, 64K)) we
unpin its extent map and attempt to merge it with the extent map for
the range [64K, 128K), but we can't because that extent map is still
pinned;
2) When the second ordered extent completes (file range [64K, 128K)), we
unpin its extent map and merge it with the previous extent map, for
file range [0, 64K), but we can't merge with the next extent map, for
the file range [128K, 192K), because this one is still pinned.
The merged extent map for the file range [0, 128K) gets the flag
EXTENT_MAP_MERGED set;
3) When the third ordered extent completes (file range [128K, 192K)), we
unpin its extent map and attempt to merge it with the previous extent
map, for file range [0, 128K), but we can't because that extent map
has the flag EXTENT_MAP_MERGED set (mergeable_maps() returns false
due to different flags) while the extent map for the range [128K, 192K)
doesn't have that flag set.
We also can't merge it with the next extent map, for file range
[192K, 256K), because that one is still pinned.
At this moment we have 3 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 192K).
One for file range [192K, 256K) which is still pinned;
4) When the fourth and final extent completes (file range [192K, 256K)),
we unpin its extent map and attempt to merge it with the previous
extent map, for file range [128K, 192K), which succeeds since none
of these extent maps have the EXTENT_MAP_MERGED flag set.
So we end up with 2 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 256K), with the flag EXTENT_MAP_MERGED set.
Since after merging extent maps we don't attempt to merge again, that
is, merge the resulting extent map with the one that is now preceding
it (and the one following it), we end up with those two extent maps,
when we could have had a single extent map to represent the whole file.
Fix this by making mergeable_maps() ignore the EXTENT_MAP_MERGED flag.
While this doesn't present any functional issue, it prevents the merging
of extent maps which allows to save memory, and can make defrag not
merging extents too (that will be addressed in the next patch).
bpf, test_run: Fix LIVE_FRAME frame update after a page has been recycled
The test_run code detects whether a page has been modified and
re-initialises the xdp_frame structure if it has, using
xdp_update_frame_from_buff(). However, xdp_update_frame_from_buff()
doesn't touch frame->mem, so that wasn't correctly re-initialised, which
led to the pages from page_pool not being returned correctly. Syzbot
noticed this as a memory leak.
Fix this by also copying the frame->mem structure when re-initialising
the frame, like we do on initialisation of a new page from page_pool.
Jens Axboe [Thu, 31 Oct 2024 15:10:07 +0000 (09:10 -0600)]
Merge tag 'nvme-6.12-2024-10-31' of git://git.infradead.org/nvme into block-6.12
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.12
- Spec compliant identification fix (Keith)
- Module parameter to enable backward compatibility on unusual
namespace formats (Keith)
- Target double free fix when using keys (Vitaliy)
- Passthrough command error handling fix (Keith)"
* tag 'nvme-6.12-2024-10-31' of git://git.infradead.org/nvme:
nvme: re-fix error-handling for io_uring nvme-passthrough
nvmet-auth: assign dh_key to NULL after kfree_sensitive
nvme: module parameter to disable pi with offsets
nvme: enhance cns version checking
Jens Axboe [Thu, 31 Oct 2024 14:05:44 +0000 (08:05 -0600)]
io_uring/rw: fix missing NOWAIT check for O_DIRECT start write
When io_uring starts a write, it'll call kiocb_start_write() to bump the
super block rwsem, preventing any freezes from happening while that
write is in-flight. The freeze side will grab that rwsem for writing,
excluding any new writers from happening and waiting for existing writes
to finish. But io_uring unconditionally uses kiocb_start_write(), which
will block if someone is currently attempting to freeze the mount point.
This causes a deadlock where freeze is waiting for previous writes to
complete, but the previous writes cannot complete, as the task that is
supposed to complete them is blocked waiting on starting a new write.
This results in the following stuck trace showing that dependency with
the write blocked starting a new write:
task:fio state:D stack:0 pid:886 tgid:886 ppid:876
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_rwsem_wait+0x1e8/0x3f8
__percpu_down_read+0xe8/0x500
io_write+0xbb8/0xff8
io_issue_sqe+0x10c/0x1020
io_submit_sqes+0x614/0x2110
__arm64_sys_io_uring_enter+0x524/0x1038
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
INFO: task fsfreeze:7364 blocked for more than 15 seconds.
Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963
with the attempting freezer stuck trying to grab the rwsem:
Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a
blocking grab of the super block rwsem if it isn't set. For normal issue
where IOCB_NOWAIT would always be set, this returns -EAGAIN which will
have io_uring core issue a blocking attempt of the write. That will in
turn also get completions run, ensuring forward progress.
Since freezing requires CAP_SYS_ADMIN in the first place, this isn't
something that can be triggered by a regular user.
Matthew Brost [Fri, 25 Oct 2024 21:43:29 +0000 (14:43 -0700)]
drm/xe: Don't short circuit TDR on jobs not started
Short circuiting TDR on jobs not started is an optimization which is not
required. On LNL we are facing an issue where jobs do not get scheduled
by the GuC if it misses a GGTT page update. When this occurs let the TDR
fire, toggle the scheduling which may get the job unstuck, and print a
warning message. If the TDR fires twice on job that hasn't started,
timeout the job.
v2:
- Add warning message (Paulo)
- Add fixes tag (Paulo)
- Timeout job which hasn't started after TDR firing twice
v3:
- Include local change
v4:
- Short circuit check_timeout on job not started
- use warn level rather than notice (Paulo)
Matthew Brost [Wed, 23 Oct 2024 22:12:00 +0000 (15:12 -0700)]
drm/xe: Add mmio read before GGTT invalidate
On LNL without a mmio read before a GGTT invalidate the GuC can
incorrectly read the GGTT scratch page upon next access leading to jobs
not getting scheduled. A mmio read before a GGTT invalidate seems to fix
this. Since a GGTT invalidate is not a hot code path, blindly do a mmio
read before each GGTT invalidate.
Andy Shevchenko [Wed, 30 Oct 2024 17:36:52 +0000 (19:36 +0200)]
gpio: sloppy-logic-analyzer: Check for error code from devm_mutex_init() call
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Suraj Sonawane [Sat, 26 Oct 2024 09:06:42 +0000 (14:36 +0530)]
gpio: fix uninit-value in swnode_find_gpio
Fix an issue detected by the Smatch tool:
drivers/gpio/gpiolib-swnode.c:78 swnode_find_gpio() error:
uninitialized symbol 'ret'.
The issue occurs because the 'ret' variable may be used without
initialization if the for_each_gpio_property_name loop does not run.
This could lead to returning an undefined value, causing unpredictable
behavior.
Initialize 'ret' to 0 before the loop to ensure the function
returns an error code if no properties are parsed, maintaining proper
error handling.
Paolo Abeni [Thu, 31 Oct 2024 10:32:57 +0000 (11:32 +0100)]
Merge tag 'for-net-2024-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci: fix null-ptr-deref in hci_read_supported_codecs
* tag 'for-net-2024-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
====================
====================
There are some bugfix for the HNS3 ethernet driver
ChangeLog:
v2 -> v3:
- Rewrite the commit logs of net: hns3: add sync command to sync io-pgtable' to
add more verbose explanation, suggested Paolo.
- Add fixes tag for hardware issue, suggested Paolo and Simon Horman.
v2: https://lore.kernel.org/all/20241018101059.1718375[email protected]/
v1 -> v2:
- Pass IRQF_NO_AUTOEN to request_irq(), suggested by Jakub.
- Rewrite the commit logs of 'net: hns3: default enable tx bounce buffer when smmu enabled'
and 'net: hns3: add sync command to sync io-pgtable'.
v1: https://lore.kernel.org/all/20241011094521.3008298[email protected]/
====================
Jie Wang [Fri, 25 Oct 2024 09:29:38 +0000 (17:29 +0800)]
net: hns3: fix kernel crash when 1588 is sent on HIP08 devices
Currently, HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL. But the tx process would still try to set hardware time
stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash.
Hao Lan [Fri, 25 Oct 2024 09:29:37 +0000 (17:29 +0800)]
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file") Signed-off-by: Hao Lan <[email protected]> Signed-off-by: Jijie Shao <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Jian Shen [Fri, 25 Oct 2024 09:29:36 +0000 (17:29 +0800)]
net: hns3: initialize reset_timer before hclgevf_misc_irq_init()
Currently the misc irq is initialized before reset_timer setup. But
it will access the reset_timer in the irq handler. So initialize
the reset_timer earlier.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Jijie Shao <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Jian Shen [Fri, 25 Oct 2024 09:29:35 +0000 (17:29 +0800)]
net: hns3: don't auto enable misc vector
Currently, there is a time window between misc irq enabled
and service task inited. If an interrupte is reported at
this time, it will cause warning like below:
Hao Lan [Fri, 25 Oct 2024 09:29:34 +0000 (17:29 +0800)]
net: hns3: Resolved the issue that the debugfs query result is inconsistent.
This patch modifies the implementation of debugfs:
When the user process stops unexpectedly, not all data of the file system
is read. In this case, the save_buf pointer is not released. When the user
process is called next time, save_buf is used to copy the cached data
to the user space. As a result, the queried data is inconsistent. To solve
this problem, determine whether the function is invoked for the first time
based on the value of *ppos. If *ppos is 0, obtain the actual data.
Hao Lan [Fri, 25 Oct 2024 09:29:33 +0000 (17:29 +0800)]
net: hns3: fix missing features due to dev->features configuration too early
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Hao Lan [Fri, 25 Oct 2024 09:29:32 +0000 (17:29 +0800)]
net: hns3: fixed reset failure issues caused by the incorrect reset type
When a reset type that is not supported by the driver is input, a reset
pending flag bit of the HNAE3_NONE_RESET type is generated in
reset_pending. The driver does not have a mechanism to clear this type
of error. As a result, the driver considers that the reset is not
complete. This patch provides a mechanism to clear the
HNAE3_NONE_RESET flag and the parameter of
hnae3_ae_ops.set_default_reset_request is verified.
Jian Shen [Fri, 25 Oct 2024 09:29:31 +0000 (17:29 +0800)]
net: hns3: add sync command to sync io-pgtable
To avoid errors in pgtable prefectch, add a sync command to sync
io-pagtable.
This is a supplement for the previous patch.
We want all the tx packet can be handled with tx bounce buffer path.
But it depends on the remain space of the spare buffer, checked by the
hns3_can_use_tx_bounce(). In most cases, maybe 99.99%, it returns true.
But once it return false by no available space, the packet will be handled
with the former path, which will map/unmap the skb buffer.
Then the driver will face the smmu prefetch risk again.
So add a sync command in this case to avoid smmu prefectch,
just protects corner scenes.
Peiyang Wang [Fri, 25 Oct 2024 09:29:30 +0000 (17:29 +0800)]
net: hns3: default enable tx bounce buffer when smmu enabled
The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.
This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()
If access to offset + length is larger than the skbuff length, then
skb_checksum() triggers BUG_ON().
skb_checksum() internally subtracts the length parameter while iterating
over skbuff, BUG_ON(len) at the end of it checks that the expected
length to be included in the checksum calculation is fully consumed.
Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support") Reported-by: Slavin Liu <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
Jinjie Ruan [Wed, 30 Oct 2024 02:35:02 +0000 (10:35 +0800)]
drm/tests: helpers: Add helper for drm_display_mode_from_cea_vic()
As Maxime suggested, add a new helper
drm_kunit_display_mode_from_cea_vic(), it can replace the direct call
of drm_display_mode_from_cea_vic(), and it will help solving
the `mode` memory leaks.
Daniel Golle [Sat, 26 Oct 2024 13:52:25 +0000 (14:52 +0100)]
net: ethernet: mtk_wed: fix path of MT7988 WO firmware
linux-firmware commit 808cba84 ("mtk_wed: add firmware for mt7988
Wireless Ethernet Dispatcher") added mt7988_wo_{0,1}.bin in the
'mediatek/mt7988' directory while driver current expects the files in
the 'mediatek' directory.
Change path in the driver header now that the firmware has been added.
Jakub Kicinski [Thu, 31 Oct 2024 01:24:41 +0000 (18:24 -0700)]
Merge branch 'mlxsw-fixes'
Petr Machata says:
====================
mlxsw: Fixes
In this patchset:
- Tx header should be pushed for each packet which is transmitted via
Spectrum ASICs. Patch #1 adds a missing call to skb_cow_head() to make
sure that there is both enough room to push the Tx header and that the
SKB header is not cloned and can be modified.
- Commit b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers
allocation") converted mlxsw to use page pool for Rx buffers allocation.
Sync for CPU and for device should be done for Rx pages. In patches #2
and #3, add the missing calls to sync pages for, respectively, CPU and
the device.
- Patch #4 then fixes a bug to IPv6 GRE forwarding offload. Patch #5 adds
a generic forwarding test that fails with mlxsw ports prior to the fix.
====================
Ido Schimmel [Fri, 25 Oct 2024 14:26:29 +0000 (16:26 +0200)]
selftests: forwarding: Add IPv6 GRE remote change tests
Test that after changing the remote address of an ip6gre net device
traffic is forwarded as expected. Test with both flat and hierarchical
topologies and with and without an input / output keys.
Ido Schimmel [Fri, 25 Oct 2024 14:26:28 +0000 (16:26 +0200)]
mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address
The device stores IPv6 addresses that are used for encapsulation in
linear memory that is managed by the driver.
Changing the remote address of an ip6gre net device never worked
properly, but since cited commit the following reproducer [1] would
result in a warning [2] and a memory leak [3]. The problem is that the
new remote address is never added by the driver to its hash table (and
therefore the device) and the old address is never removed from it.
Fix by programming the new address when the configuration of the ip6gre
net device changes and removing the old one. If the address did not
change, then the above would result in increasing the reference count of
the address and then decreasing it.
[1]
# ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit
# ip link set dev bla type ip6gre remote 2001:db8:3::1
# ip link del dev bla
# devlink dev reload pci/0000:01:00.0
Amit Cohen [Fri, 25 Oct 2024 14:26:27 +0000 (16:26 +0200)]
mlxsw: pci: Sync Rx buffers for device
Non-coherent architectures, like ARM, may require invalidating caches
before the device can use the DMA mapped memory, which means that before
posting pages to device, drivers should sync the memory for device.
Sync for device can be configured as page pool responsibility. Set the
relevant flag and define max_len for sync.
Amit Cohen [Fri, 25 Oct 2024 14:26:26 +0000 (16:26 +0200)]
mlxsw: pci: Sync Rx buffers for CPU
When Rx packet is received, drivers should sync the pages for CPU, to
ensure the CPU reads the data written by the device and not stale
data from its cache.
Add the missing sync call in Rx path, sync the actual length of data for
each fragment.
Amit Cohen [Fri, 25 Oct 2024 14:26:25 +0000 (16:26 +0200)]
mlxsw: spectrum_ptp: Add missing verification before pushing Tx header
Tx header should be pushed for each packet which is transmitted via
Spectrum ASICs. The cited commit moved the call to skb_cow_head() from
mlxsw_sp_port_xmit() to functions which handle Tx header.
In case that mlxsw_sp->ptp_ops->txhdr_construct() is used to handle Tx
header, and txhdr_construct() is mlxsw_sp_ptp_txhdr_construct(), there is
no call for skb_cow_head() before pushing Tx header size to SKB. This flow
is relevant for Spectrum-1 and Spectrum-4, for PTP packets.
Add the missing call to skb_cow_head() to make sure that there is both
enough room to push the Tx header and that the SKB header is not cloned and
can be modified.
An additional set will be sent to net-next to centralize the handling of
the Tx header by pushing it to every packet just before transmission.
Benoît Monin [Thu, 24 Oct 2024 14:01:54 +0000 (16:01 +0200)]
net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability
can only checksum TCP and UDP over IPv6 if the IP header does not
contains extension.
This is enforced for UDP packets emitted from user-space to an IPv6
address as they go through ip6_make_skb(), which calls
__ip6_append_data() where a check is done on the header size before
setting CHECKSUM_PARTIAL.
But the introduction of UDP encapsulation with fou6 added a code-path
where it is possible to get an skb with a partial UDP checksum and an
IPv6 header with extension:
* fou6 adds a UDP header with a partial checksum if the inner packet
does not contains a valid checksum.
* ip6_tunnel adds an IPv6 header with a destination option extension
header if encap_limit is non-zero (the default value is 4).
The thread linked below describes in more details how to reproduce the
problem with GRE-in-UDP tunnel.
Add a check on the network header size in skb_csum_hwoffload_help() to
make sure no IPv6 packet with extension header is handed to a network
device with NETIF_F_IPV6_CSUM capability.
Alice Ryhl [Wed, 30 Oct 2024 10:31:34 +0000 (10:31 +0000)]
cfi: tweak llvm version for HAVE_CFI_ICALL_NORMALIZE_INTEGERS
The llvm fix [1] did not make it for 19.0.0, but ended up getting
backported to llvm 19.1.3 [2]. Thus, fix the version requirement to
correctly specify which versions have the bug.
Linus Torvalds [Wed, 30 Oct 2024 21:17:47 +0000 (11:17 -1000)]
Merge tag 'perf-tools-fixes-for-v6.12-2-2024-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update more header copies with the kernel sources, including const.h,
msr-index.h, arm64's cputype.h, kvm's, bits.h and unaligned.h
- The return from 'write' isn't a pid, fix cut'n'paste error in 'perf
trace'
- Fix up the python binding build on architectures without
HAVE_KVM_STAT_SUPPORT
- Add some more bounds checks to augmented_raw_syscalls.bpf.c (used to
collect syscall pointer arguments in 'perf trace') to make the
resulting bytecode to pass the kernel BPF verifier, allowing us to go
back accepting clang 12.0.1 as the minimum version required for
compiling BPF sources
- Add __NR_capget for x86 to fix a regression on running perf + intel
PT (hw tracing) as non-root setting up the capabilities as described
in https://www.kernel.org/doc/html/latest/admin-guide/perf-security.html
- Fix missing syscalltbl in non-explicitly listed architectures,
noticed on ARM 32-bit, that still needs a .tbl generator for the
syscall id<->name tables, should be added for v6.13
- Handle 'perf test' failure when handling broken DWARF for ASM files
* tag 'perf-tools-fixes-for-v6.12-2-2024-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf cap: Add __NR_capget to arch/x86 unistd
tools headers: Update the linux/unaligned.h copy with the kernel sources
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools headers: Synchronize {uapi/}linux/bits.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf python: Fix up the build on architectures without HAVE_KVM_STAT_SUPPORT
perf test: Handle perftool-testsuite_probe failure due to broken DWARF
tools headers UAPI: Sync kvm headers with the kernel sources
perf trace: Fix non-listed archs in the syscalltbl routines
perf build: Change the clang check back to 12.0.1
perf trace augmented_raw_syscalls: Add more checks to pass the verifier
perf trace augmented_raw_syscalls: Add extra array index bounds checking to satisfy some BPF verifiers
perf trace: The return from 'write' isn't a pid
tools headers UAPI: Sync linux/const.h with the kernel headers
====================
The patch set fixes several issues in bits iterator. Patch #1 fixes the
kmemleak problem of bits iterator. Patch #2~#3 fix the overflow problem
of nr_bits. Patch #4 fixes the potential stack corruption when bits
iterator is used on 32-bit host. Patch #5 adds more test cases for bits
iterator.
Please see the individual patches for more details. And comments are
always welcome.
---
v4:
* patch #1: add ack from Yafang
* patch #3: revert code-churn like changes:
(1) compute nr_bytes and nr_bits before the check of nr_words.
(2) use nr_bits == 64 to check for single u64, preventing build
warning on 32-bit hosts.
* patch #4: use "BITS_PER_LONG == 32" instead of "!defined(CONFIG_64BIT)"
v3: https://lore.kernel.org/bpf/20241025013233[email protected]/T/#t
* split the bits-iterator related patches from "Misc fixes for bpf"
patch set
* patch #1: use "!nr_bits || bits >= nr_bits" to stop the iteration
* patch #2: add a new helper for the overflow problem
* patch #3: decrease the limitation from 512 to 511 and check whether
nr_bytes is too large for bpf memory allocator explicitly
* patch #5: add two more test cases for bit iterator
Hou Tao [Wed, 30 Oct 2024 10:05:16 +0000 (18:05 +0800)]
selftests/bpf: Add three test cases for bits_iter
Add more test cases for bits iterator:
(1) huge word test
Verify the multiplication overflow of nr_bits in bits_iter. Without
the overflow check, when nr_words is 67108865, nr_bits becomes 64,
causing bpf_probe_read_kernel_common() to corrupt the stack.
(2) max word test
Verify correct handling of maximum nr_words value (511).
(3) bad word test
Verify early termination of bits iteration when bits iterator
initialization fails.
Also rename bits_nomem to bits_too_big to better reflect its purpose.
Hou Tao [Wed, 30 Oct 2024 10:05:15 +0000 (18:05 +0800)]
bpf: Use __u64 to save the bits in bits iterator
On 32-bit hosts (e.g., arm32), when a bpf program passes a u64 to
bpf_iter_bits_new(), bpf_iter_bits_new() will use bits_copy to store the
content of the u64. However, bits_copy is only 4 bytes, leading to stack
corruption.
The straightforward solution would be to replace u64 with unsigned long
in bpf_iter_bits_new(). However, this introduces confusion and problems
for 32-bit hosts because the size of ulong in bpf program is 8 bytes,
but it is treated as 4-bytes after passed to bpf_iter_bits_new().
Fix it by changing the type of both bits and bit_count from unsigned
long to u64. However, the change is not enough. The main reason is that
bpf_iter_bits_next() uses find_next_bit() to find the next bit and the
pointer passed to find_next_bit() is an unsigned long pointer instead
of a u64 pointer. For 32-bit little-endian host, it is fine but it is
not the case for 32-bit big-endian host. Because under 32-bit big-endian
host, the first iterated unsigned long will be the bits 32-63 of the u64
instead of the expected bits 0-31. Therefore, in addition to changing
the type, swap the two unsigned longs within the u64 for 32-bit
big-endian host.
Hou Tao [Wed, 30 Oct 2024 10:05:14 +0000 (18:05 +0800)]
bpf: Check the validity of nr_words in bpf_iter_bits_new()
Check the validity of nr_words in bpf_iter_bits_new(). Without this
check, when multiplication overflow occurs for nr_bits (e.g., when
nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur
due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008).
Fix it by limiting the maximum value of nr_words to 511. The value is
derived from the current implementation of BPF memory allocator. To
ensure compatibility if the BPF memory allocator's size limitation
changes in the future, use the helper bpf_mem_alloc_check_size() to
check whether nr_bytes is too larger. And return -E2BIG instead of
-ENOMEM for oversized nr_bytes.
Hou Tao [Wed, 30 Oct 2024 10:05:13 +0000 (18:05 +0800)]
bpf: Add bpf_mem_alloc_check_size() helper
Introduce bpf_mem_alloc_check_size() to check whether the allocation
size exceeds the limitation for the kmalloc-equivalent allocator. The
upper limit for percpu allocation is LLIST_NODE_SZ bytes larger than
non-percpu allocation, so a percpu argument is added to the helper.
The helper will be used in the following patch to check whether the size
parameter passed to bpf_mem_alloc() is too big.
Hou Tao [Wed, 30 Oct 2024 10:05:12 +0000 (18:05 +0800)]
bpf: Free dynamically allocated bits in bpf_iter_bits_destroy()
bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the
bits are dynamically allocated. However, the check is incorrect and may
cause a kmemleak as shown below:
That is because nr_bits will be set as zero in bpf_iter_bits_next()
after all bits have been iterated.
Fix the issue by setting kit->bit to kit->nr_bits instead of setting
kit->nr_bits to zero when the iteration completes in
bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to
check whether the iteration is complete and still use "nr_bits > 64" to
indicate whether bits are dynamically allocated. The "!nr_bits" check is
necessary because bpf_iter_bits_new() may fail before setting
kit->nr_bits, and this condition will stop the iteration early instead
of accessing the zeroed or freed kit->bits.
Considering the initial value of kit->bits is -1 and the type of
kit->nr_bits is unsigned int, change the type of kit->nr_bits to int.
The potential overflow problem will be handled in the following patch.
Sungwoo Kim [Tue, 29 Oct 2024 19:44:41 +0000 (19:44 +0000)]
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes.
__hci_cmd_sync_sk() returns NULL if a command returns a status event.
However, it also returns NULL where an opcode doesn't exist in the
hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0]
for unknown opcodes.
This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as
there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes
status = skb->data[0].
Linus Torvalds [Wed, 30 Oct 2024 18:16:23 +0000 (08:16 -1000)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, both in drivers (ufs and scsi_debug)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix another deadlock during RTC update
scsi: scsi_debug: Fix do_device_access() handling of unexpected SG copy length
Boris Brezillon [Tue, 29 Oct 2024 15:29:10 +0000 (16:29 +0100)]
drm/panthor: Fail job creation when the group is dead
Userspace can use GROUP_SUBMIT errors as a trigger to check the group
state and recreate the group if it became unusable. Make sure we
report an error when the group became unusable.
Boris Brezillon [Wed, 30 Oct 2024 15:02:31 +0000 (16:02 +0100)]
drm/panthor: Fix firmware initialization on systems with a page size > 4k
The system and GPU MMU page size might differ, which becomes a
problem for FW sections that need to be mapped at explicit addresses
since our PAGE_SIZE alignment might cover a VA range that's
expected to be used for another section.
Make sure we never map more than we need.
Changes in v3:
- Add R-bs
Changes in v2:
- Plan for per-VM page sizes so the MCU VM and user VM can
have different pages sizes
Keith Busch [Mon, 28 Oct 2024 20:45:46 +0000 (13:45 -0700)]
nvme: re-fix error-handling for io_uring nvme-passthrough
This was previously fixed with commit 1147dd0503564fa0e0348
("nvme: fix error-handling for io_uring nvme-passthrough"), but the
change was mistakenly undone in a later commit.
nvmet-auth: assign dh_key to NULL after kfree_sensitive
ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup()
for the same controller. So it's better to nullify it after release on
error path in order to avoid double free later in nvmet_destroy_auth().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Keith Busch [Wed, 23 Oct 2024 15:40:26 +0000 (08:40 -0700)]
nvme: module parameter to disable pi with offsets
A recent commit enables integrity checks for formats the previous kernel
versions registered with the "nop" integrity profile. This means
namespaces using that format become unreadable when upgrading the kernel
past that commit.
Introduce a module parameter to restore the "nop" integrity profile so
that storage can be readable once again. This could be a boot device, so
the setting needs to happen at module load time.
Jan Schär [Tue, 29 Oct 2024 22:12:49 +0000 (23:12 +0100)]
ALSA: usb-audio: Add quirks for Dell WD19 dock
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
Takashi Iwai [Wed, 30 Oct 2024 13:46:35 +0000 (14:46 +0100)]
Merge tag 'asoc-fix-v6.12-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
The biggest set of changes here is Hans' fixes and quirks for various
Baytrail based platforms with RT5640 CODECs, and there's one core fix
for a missed length assignment for __counted_by() checking. Otherwise
it's small device specific fixes, several of them in the DT bindings.
Concurrent execution of module unload and get_info() trigered the warning.
The root cause is as follows:
cpu0 cpu1
module_exit
//mod->state = MODULE_STATE_GOING
ip6table_nat_exit
xt_unregister_template
kfree(t)
//removed from templ_list
getinfo()
t = xt_find_table_lock
list_for_each_entry(tmpl, &xt_templates[af]...)
if (strcmp(tmpl->name, name))
continue; //table not found
try_module_get
list_for_each_entry(t, &xt_net->tables[af]...)
return t; //not get refcnt
module_put(t->me) //uaf
unregister_pernet_subsys
//remove table from xt_net list
While xt_table module was going away and has been removed from
xt_templates list, we couldnt get refcnt of xt_table->me. Check
module in xt_net->tables list re-traversal to fix it.
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Signed-off-by: Dong Chenchen <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
The NOC firewall interrupt means that the HW prevented
unauthorized access to a protected resource, so there
is no need to trigger device reset in such case.
To facilitate security testing add firewall_irq_counter
debugfs file that tracks firewall interrupts.
Eduard Zingerman [Tue, 29 Oct 2024 19:39:11 +0000 (12:39 -0700)]
bpf: disallow 40-bytes extra stack for bpf_fastcall patterns
Hou Tao reported an issue with bpf_fastcall patterns allowing extra
stack space above MAX_BPF_STACK limit. This extra stack allowance is
not integrated properly with the following verifier parts:
- backtracking logic still assumes that stack can't exceed
MAX_BPF_STACK;
- bpf_verifier_env->scratched_stack_slots assumes only 64 slots are
available.
Here is an example of an issue with precision tracking
(note stack slot -8 tracked as precise instead of -520):
This patch disables the additional allowance for the moment.
Also, two test cases are removed:
- bpf_fastcall_max_stack_ok:
it fails w/o additional stack allowance;
- bpf_fastcall_max_stack_fail:
this test is no longer necessary, stack size follows
regular rules, pattern invalidation is checked by other
test cases.
Linus Torvalds [Wed, 30 Oct 2024 02:41:30 +0000 (16:41 -1000)]
Merge tag 'cgroup-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- cgroup_bpf_release_fn() could saturate system_wq with
cgrp->bpf.release_work which can then form a circular dependency
leading to deadlocks. Fix by using a dedicated workqueue. The
system_wq's max concurrency limit is being increased separately.
- Fix theoretical off-by-one bug when enforcing max cgroup hierarchy
depth
* tag 'cgroup-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix potential overflow issue when checking max_depth
cgroup/bpf: use a dedicated workqueue for cgroup bpf destruction
Linus Torvalds [Wed, 30 Oct 2024 02:35:40 +0000 (16:35 -1000)]
Merge tag 'sched_ext-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Instances of scx_ops_bypass() could race each other leading to
misbehavior. Fix by protecting the operation with a spinlock.
- selftest and userspace header fixes
* tag 'sched_ext-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix enq_last_no_enq_fails selftest
sched_ext: Make cast_mask() inline
scx: Fix raciness in scx_ops_bypass()
scx: Fix exit selftest to use custom DSQ
sched_ext: Fix function pointer type mismatches in BPF selftests
selftests/sched_ext: add order-only dependency of runner.o on BPFOBJ
Linus Torvalds [Wed, 30 Oct 2024 02:24:02 +0000 (16:24 -1000)]
Merge tag 'slab-for-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Fix for a slub_kunit test warning with MEM_ALLOC_PROFILING_DEBUG (Pei
Xiao)
- Fix for a MTE-based KASAN BUG in krealloc() (Qun-Wei Lin)
* tag 'slab-for-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm: krealloc: Fix MTE false alarm in __do_krealloc
slub/kunit: fix a WARNING due to unwrapped __kmalloc_cache_noprof
Linus Torvalds [Wed, 30 Oct 2024 02:19:15 +0000 (16:19 -1000)]
Merge tag 'mm-hotfixes-stable-2024-10-28-21-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 13 are cc:stable. 13 are MM and 8 are non-MM.
No particular theme here - mainly singletons, a couple of doubletons.
Please see the changelogs"
* tag 'mm-hotfixes-stable-2024-10-28-21-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
mm: avoid unconditional one-tick sleep when swapcache_prepare fails
mseal: update mseal.rst
mm: split critical region in remap_file_pages() and invoke LSMs in between
selftests/mm: fix deadlock for fork after pthread_create with atomic_bool
Revert "selftests/mm: replace atomic_bool with pthread_barrier_t"
Revert "selftests/mm: fix deadlock for fork after pthread_create on ARM"
tools: testing: add expand-only mode VMA test
mm/vma: add expand-only VMA merge mode and optimise do_brk_flags()
resource,kexec: walk_system_ram_res_rev must retain resource flags
nilfs2: fix kernel bug due to missing clearing of checked flag
mm: numa_clear_kernel_node_hotplug: Add NUMA_NO_NODE check for node id
ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow
mm: shmem: fix data-race in shmem_getattr()
mm: mark mas allocation in vms_abort_munmap_vmas as __GFP_NOFAIL
x86/traps: move kmsan check after instrumentation_begin
resource: remove dependency on SPARSEMEM from GET_FREE_REGION
mm/mmap: fix race in mmap_region() with ftruncate()
mm/page_alloc: let GFP_ATOMIC order-0 allocs access highatomic reserves
fork: only invoke khugepaged, ksm hooks if no error
fork: do not invoke uffd on fork if error occurs
...
Jakub Kicinski [Wed, 30 Oct 2024 01:57:12 +0000 (18:57 -0700)]
Merge tag 'wireless-2024-10-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless fixes for v6.12-rc6
Another set of fixes, mostly iwlwifi:
* fix infinite loop in 6 GHz scan if more than
255 colocated APs were reported
* revert removal of retry loops for now to work
around issues with firmware initialization on
some devices/platforms
* fix SAR table issues with some BIOSes
* fix race in suspend/debug collection
* fix memory leak in fw recovery
* fix link ID leak in AP mode for older devices
* fix sending TX power constraints
* fix link handling in FW restart
And also the stack:
* fix setting TX power from userspace with the new
chanctx emulation code for old-style drivers
* fix a memory corruption bug due to structure
embedding
* fix CQM configuration double-free when moving
between net namespaces
* tag 'wireless-2024-10-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: ieee80211_i: Fix memory corruption bug in struct ieee80211_chanctx
wifi: iwlwifi: mvm: fix 6 GHz scan construction
wifi: cfg80211: clear wdev->cqm_config pointer on free
mac80211: fix user-power when emulating chanctx
Revert "wifi: iwlwifi: remove retry loops in start"
wifi: iwlwifi: mvm: don't add default link in fw restart flow
wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()
wifi: iwlwifi: mvm: SAR table alignment
wifi: iwlwifi: mvm: Use the sync timepoint API in suspend
wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd
wifi: iwlwifi: mvm: don't leak a link on AP removal
====================
Wang Liang [Wed, 23 Oct 2024 03:52:13 +0000 (11:52 +0800)]
net: fix crash when config small gso_max_size/gso_ipv4_max_size
Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow
in sk_dst_gso_max_size(), which may trigger a BUG_ON crash,
because sk->sk_gso_max_size would be much bigger than device limits.
Call Trace:
tcp_write_xmit
tso_segs = tcp_init_tso_segs(skb, mss_now);
tcp_set_skb_tso_segs
tcp_skb_pcount_set
// skb->len = 524288, mss_now = 8
// u16 tso_segs = 524288/8 = 65535 -> 0
tso_segs = DIV_ROUND_UP(skb->len, mss_now)
BUG_ON(!tso_segs)
Add check for the minimum value of gso_max_size and gso_ipv4_max_size.
Zhihao Cheng [Mon, 21 Oct 2024 14:02:15 +0000 (22:02 +0800)]
btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids()
Mounting btrfs from two images (which have the same one fsid and two
different dev_uuids) in certain executing order may trigger an UAF for
variable 'device->bdev_file' in __btrfs_free_extra_devids(). And
following are the details:
1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs
devices by ioctl(BTRFS_IOC_SCAN_DEV):
3. mount /dev/loop1 /mnt
btrfs_open_devices
btrfs_get_bdev_and_sb(&bdev_file)
// EIO, btrfs_device_1->bdev_file is not assigned,
// which points to a freed memory area
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
btrfs_free_extra_devids
if (btrfs_device_1->bdev_file)
fput(btrfs_device_1->bdev_file) // UAF !
Fix it by setting 'device->bdev_file' as 'NULL' after closing the
btrfs_device in btrfs_close_one_device().
Byeonguk Jeong [Sat, 26 Oct 2024 05:04:58 +0000 (14:04 +0900)]
selftests/bpf: Add test for trie_get_next_key()
Add a test for out-of-bounds write in trie_get_next_key() when a full
path from root to leaf exists and bpf_map_get_next_key() is called
with the leaf node. It may crashes the kernel on failure, so please
run in a VM.
Byeonguk Jeong [Sat, 26 Oct 2024 05:02:43 +0000 (14:02 +0900)]
bpf: Fix out-of-bounds write in trie_get_next_key()
trie_get_next_key() allocates a node stack with size trie->max_prefixlen,
while it writes (trie->max_prefixlen + 1) nodes to the stack when it has
full paths from the root to leaves. For example, consider a trie with
max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ...
0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with
.prefixlen = 8 make 9 nodes be written on the node stack with size 8.
- regarding the LO switch patch. I've got info about that from two persons
independently hence not sure what tags to put there and who should be
the author. Please let me know if that needs to be corrected.
- the wcd937x pdm watchdog is a problem for audio playback and needs to be
fixed. The minimal fix would be to at least increase timeout value but
it will still trigger in case of plenty of dbg messages or other
delay-generating things. Unfortunately, I can't test HPHL/R outputs hence
the patch is only for AUX. The other options would be introducing
module parameter for debugging and using HOLD_OFF bit for that or
adding Kconfig option.
Alexey Klimov (2):
ASoC: codecs: wcd937x: add missing LO Switch control
ASoC: codecs: wcd937x: relax the AUX PDM watchdog
Vladimir Oltean [Wed, 23 Oct 2024 10:05:41 +0000 (13:05 +0300)]
net/sched: sch_api: fix xa_insert() error path in tcf_block_get_ext()
This command:
$ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact
Error: block dev insert failed: -EBUSY.
fails because user space requests the same block index to be set for
both ingress and egress.
[ side note, I don't think it even failed prior to commit 913b47d3424e
("net/sched: Introduce tc block netdev tracking infra"), because this
is a command from an old set of notes of mine which used to work, but
alas, I did not scientifically bisect this ]
The problem is not that it fails, but rather, that the second time
around, it fails differently (and irrecoverably):
$ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact
Error: dsa_core: Flow block cb is busy.
[ another note: the extack is added by me for illustration purposes.
the context of the problem is that clsact_init() obtains the same
&q->ingress_block pointer as &q->egress_block, and since we call
tcf_block_get_ext() on both of them, "dev" will be added to the
block->ports xarray twice, thus failing the operation: once through
the ingress block pointer, and once again through the egress block
pointer. the problem itself is that when xa_insert() fails, we have
emitted a FLOW_BLOCK_BIND command through ndo_setup_tc(), but the
offload never sees a corresponding FLOW_BLOCK_UNBIND. ]
Even correcting the bad user input, we still cannot recover:
$ tc qdisc replace dev swp3 ingress_block 1 egress_block 2 clsact
Error: dsa_core: Flow block cb is busy.
Basically the only way to recover is to reboot the system, or unbind and
rebind the net device driver.
To fix the bug, we need to fill the correct error teardown path which
was missed during code movement, and call tcf_block_offload_unbind()
when xa_insert() fails.
[ last note, fundamentally I blame the label naming convention in
tcf_block_get_ext() for the bug. The labels should be named after what
they do, not after the error path that jumps to them. This way, it is
obviously wrong that two labels pointing to the same code mean
something is wrong, and checking the code correctness at the goto site
is also easier ]
Zichen Xie [Tue, 22 Oct 2024 17:19:08 +0000 (12:19 -0500)]
netdevsim: Add trailing zero to terminate the string in nsim_nexthop_bucket_activity_write()
This was found by a static analyzer.
We should not forget the trailing zero after copy_from_user()
if we will further do some string operations, sscanf() in this
case. Adding a trailing zero will ensure that the function
performs properly.
Eduard Zingerman [Tue, 29 Oct 2024 17:26:41 +0000 (10:26 -0700)]
selftests/bpf: Test with a very short loop
The test added is a simplified reproducer from syzbot report [1].
If verifier does not insert checkpoint somewhere inside the loop,
verification of the program would take a very long time.
This would happen because mark_chain_precision() for register r7 would
constantly trace jump history of the loop back, processing many
iterations for each mark_chain_precision() call.
Eduard Zingerman [Tue, 29 Oct 2024 17:26:40 +0000 (10:26 -0700)]
bpf: Force checkpoint when jmp history is too long
A specifically crafted program might trick verifier into growing very
long jump history within a single bpf_verifier_state instance.
Very long jump history makes mark_chain_precision() unreasonably slow,
especially in case if verifier processes a loop.
Mitigate this by forcing new state in is_state_visited() in case if
current state's jump history is too long.
Use same constant as in `skip_inf_loop_check`, but multiply it by
arbitrarily chosen value 2 to account for jump history containing not
only information about jumps, but also information about stack access.
For an example of problematic program consider the code below,
w/o this patch the example is processed by verifier for ~15 minutes,
before failing to allocate big-enough chunk for jmp_history.
/* Maximum number of loops for bpf_loop and bpf_iter_num.
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index f514247ba8ba..75e88be3bb3e 100644
\--- a/kernel/bpf/verifier.c
\+++ b/kernel/bpf/verifier.c
\@@ -18024,8 +18024,13 @@ static int is_state_visited(struct bpf_verifier_env *env, int insn_idx)
skip_inf_loop_check:
if (!force_new_state &&
env->jmps_processed - env->prev_jmps_processed < 20 &&
- env->insn_processed - env->prev_insn_processed < 100)
+ env->insn_processed - env->prev_insn_processed < 100) {
+ verbose(env, "is_state_visited: suppressing checkpoint at %d, %d jmps processed, cur->jmp_history_cnt is %d\n",
+ env->insn_idx,
+ env->jmps_processed - env->prev_jmps_processed,
+ cur->jmp_history_cnt);
add_new_state = false;
+ }
goto miss;
}
/* If sl->state is a part of a loop and this loop's entry is a part of
\@@ -18142,6 +18147,9 @@ static int is_state_visited(struct bpf_verifier_env *env, int insn_idx)
if (!add_new_state)
return 0;
+ verbose(env, "is_state_visited: new checkpoint at %d, resetting env->jmps_processed\n",
+ env->insn_idx);
+
/* There were no equivalent states, remember the current one.
* Technically the current state is not proven to be safe yet,
* but it will either reach outer most bpf_exit (which means it's safe)
from 5 to 6: R1=ctx() R7=ctx(...) R10=fp0
6: R1=ctx() R7=ctx(...) R10=fp0
6: (b7) r0 = 0 ; R0_w=0
7: (95) exit
is_state_visited: suppressing checkpoint at 1, 3 jmps processed, cur->jmp_history_cnt is 74
from 2 to 1: R1=ctx() R7_w=scalar(...) R10=fp0
1: R1=ctx() R7_w=scalar(...) R10=fp0
1: (07) r7 += 447767737
is_state_visited: suppressing checkpoint at 2, 3 jmps processed, cur->jmp_history_cnt is 75
2: R7_w=scalar(...)
2: (45) if r7 & 0x702000 goto pc-2
... mark_precise 152 steps for r7 ...
2: R7_w=scalar(...)
is_state_visited: suppressing checkpoint at 1, 4 jmps processed, cur->jmp_history_cnt is 75
1: (07) r7 += 447767737
is_state_visited: suppressing checkpoint at 2, 4 jmps processed, cur->jmp_history_cnt is 76
2: R7_w=scalar(...)
2: (45) if r7 & 0x702000 goto pc-2
...
BPF program is too large. Processed 257 insn
The log output shows that checkpoint at label (1) is never created,
because it is suppressed by `skip_inf_loop_check` logic:
a. When 'if' at (2) is processed it pushes a state with insn_idx (1)
onto stack and proceeds to (3);
b. At (5) checkpoint is created, and this resets
env->{jmps,insns}_processed.
c. Verification proceeds and reaches `exit`;
d. State saved at step (a) is popped from stack and is_state_visited()
considers if checkpoint needs to be added, but because
env->{jmps,insns}_processed had been just reset at step (b)
the `skip_inf_loop_check` logic forces `add_new_state` to false.
e. Verifier proceeds with current state, which slowly accumulates
more and more entries in the jump history.
The accumulation of entries in the jump history is a problem because
of two factors:
- it eventually exhausts memory available for kmalloc() allocation;
- mark_chain_precision() traverses the jump history of a state,
meaning that if `r7` is marked precise, verifier would iterate
ever growing jump history until parent state boundary is reached.
(note: the log also shows a REG INVARIANTS VIOLATION warning
upon jset processing, but that's another bug to fix).
With this patch applied, the example above is rejected by verifier
under 1s of time, reaching 1M instructions limit.
The program is a simplified reproducer from syzbot report.
Previous discussion could be found at [1].
The patch does not cause any changes in verification performance,
when tested on selftests from veristat.cfg and cilium programs taken
from [2].
Changelog:
- v1 -> v2:
- moved patch to bpf tree;
- moved force_new_state variable initialization after declaration and
shortened the comment.
v1: https://lore.kernel.org/bpf/20241018020307.1766906[email protected]/
git://git.infradead.org / linux.git / log