CVS log for pkgsrc/x11/p5-Tk/Makefile

Up to [cvs.NetBSD.org] / pkgsrc / x11 / p5-Tk

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

*: recursive bump for perl 5.38

Mass-change BUILD_DEPENDS to TOOL_DEPENDS outside mk/.

Almost all uses, if not all of them, are wrong, according to the
semantics of BUILD_DEPENDS (packages built for target available for
use _by_ tools at build-time) and TOOL_DEPEPNDS (packages built for
host available for use _as_ tools at build-time).

No change to BUILD_DEPENDS as used correctly inside buildlink3.

As proposed on tech-pkg:
https://mail-index.netbsd.org/tech-pkg/2023/06/03/msg027632.html

*: recursive bump for perl 5.36

*: recursive bump for perl 5.34

p5-Tk: update to 804.035.

Tk-804.035 release (2020-03-28)
------------------

This is basically the same like Tk-804.034_501.

Tk-804.034_501 release (2020-03-19)
----------------------

Fixes
 Add dummy rules for newer EUMM (RT #124910)

 Try harder to find libpng on FreeBSD

Tk-804.034_500 release (2020-02-23)
----------------------

Fixes
 Compiles again with perl 5.31.x (see also
 github pull request #61 and https://github.com/Perl/perl5/issues/17024
 by Karl Williamson). Now ppport.h is included in the
 distribution.

 Switch to X's locale handling if needed (Karl Williamson)

 Don't use buttons 4 and 5 on non-X11 platforms
 (Christopher Chavez)

 Fix corner case in XPM handling (/* in colors section)

 Spelling/grammar fixes in comments and code (Christopher Chavez)

 Improved demo script photo1.pl (Christopher Chavez)

Documentation
 Smaller Pod fixes (Slaven Rezic, Christopher Chavez)

Tests
 travis-ci fixes

*: bump PKGREVISION for perl-5.32.

x11/p5-Tk: remove no-op SUBST block

The file does not contain the word LOCALBASE. It does contain the path
/usr/local twice though, but apparently no one cared. It might be a good
idea to add /usr/local to the list of forbidden paths (see
mk/check/check-wrkref.mk), but that would create a lot of work.

Bump PKGREVISIONs for perl 5.30.0

Update packages using a search.cpan.org HOMEPAGE to metacpan.org.

The former now redirects to the latter.

This covers the most simple cases where http://search.cpan.org/dist/name
can be changed to https://metacpan.org/release/name.

Reviewed by hand to hopefully make sure no unwanted changes sneak in.

Recursive bump for perl5-5.28.0

*: Move SUBST_STAGE from post-patch to pre-configure

Performing substitutions during post-patch breaks tools such as mkpatches,
making it very difficult to regenerate correct patches after making changes,
and often leading to substituted string replacements being committed.

Updated p5-Tk to 804.034.

Tk-804.034 release (2017-08-26)
------------------

This is basically the same like Tk-804.033_500.

Tk-804.033_500 release (2017-08-20)
----------------------

Fixes
 Fix aborts on OS X Sierra, introduced by latest clang/llvm
 strcpy/strncpy (RT #121631, github pull request #28 by Mark Aufflick)

 No special xOKp handling in Perl_Value (RT #121528)

 Add freetype2 path on MacOSX / XQuartz to inc search paths
 (github pull request #21 by Christoph Lamprecht)

 Fix Tk::NoteBook's FindMenu (Martin Jacobs)

Documentation
 Add Tk::getSaveFile Pod file (see also
 github pull request #19)

 Fix documentation about scrollbars
 (github pull request #18 by asb-cpan)

 Add openSUSE instructions to README.linux
 (github pull request #25 by Tux)

 Add documentation notes about "make -j"

Tests
 New test for Tk::NoteBook.

 t/Trace.t is using now Test::More

 travis-ci improvements

 Introduce CI testing on appveyor

Recursive revbump from lang/perl5 5.26.0

Bump PKGREVISION for perl-5.24.

Recursive PKGREVISION bump for all packages mentioning 'perl',
having a PKGNAME of p5-*, or depending such a package,
for perl-5.22.0.

Update to 804.033:

Tk-804.033 release (2015-02-21)
------------------

Tests
 New t/pod.t test (github pull request #16)

Tk-804.032_501 release (2015-01-31)
----------------------

Fixes
 Teach perl/Tk where OS X Yosemite Xquartz puts the X11 files
 (github pull request #12)

 Pushstack experiment to workaround crashes with perl 5.20.x and XFT=0
 (RT #96543)

 Tk::Text: don't insert ctrl and meta key presses
 (github issue #9)

 Fix memory leak in canvas text item handling with XFT=1
 (RT #100211)

 Use public version of Perl_utf8_hop (RT #100878)

 FixBuggyUTF8String is not called anymore for new perls

Improvements
 Use Cwd::getcwd() instead of Cwd::cwd() (performance improvement)

Tests
 t/font.t does not fail with only one font family installed
 (RT #99411)

 unicode.t - update textwidget before examining new state
 (RT #100153)

 Compatibility with old Test::More versions without note() and isa_ok
 class check

 Workaround for core dumps in some fork-using tests (RT #100399)

 Workaround for more timing problems in wm-tcl.h

Tk-804.032_500 release (2014-11-06)
----------------------

Fixes
 Freetype header files may now be in /usr/include/freetype2/freetype.h
 in newer freetype installations (e.g. Debian/jessie).
 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740207

 Tk::MainWindow::Create without args used to segfault.

 Fix X11 discovery on non-x86_64 platforms (RT #95590).

 Fix new sprintf warning with perl 5.21.x.

 Workaround behaviour change in ExtUtils::MakeMaker 6.99_10 (PERL
 value is now quoted), which caused build failures (RT #100044).

Tests
 Fix race condition in t/errordialog.t

 t/create.t uses Test::More

 Remove useless hostname and getlogin retrieval in t/fileevent.t
 (RT #98889).

 Use pipe instead of stdin in t/fileevent2.t (RT #98891).

 Fix font-related issues with t/entry.t (RT #98831).

Documentation
 New Pod ErrorDialog.pod (github pull request #6).

Update to Tk-804.032

Also add patch from development version to fix:
Workaround behaviour change in ExtUtils::MakeMaker 6.99_10 (PERL
value is now quoted), which caused build failures (RT #100044).

Tk-804.032 release (2014-01-26)
------------------

This is basically the same like Tk-804.031_503.

Tk-804.031_503 release (2013-12-07)
----------------------

Fixes
 Regain compatibility for perl < 5.8.9
 (SvIV_nomg is not available with earlier perls).

Tests
 wm-time.t more robust against GNOME Shell slowness.

Tk-804.031_502 release (2013-12-01)
----------------------

Fixes
 Enable libpng configure for all Solaris architectures.

Documentation
 Update INSTALL, README-ActiveState.txt, and README-Strawberry.txt
 documents.

Tk-804.031_501 release (2013-11-18)
----------------------

Fixes
 Fix gamma setting for PNG images (was only broken in 804.031_500).

 Fix clang compilation error (was only broken in 804.031_500).

Tests
 Some tests are now more robust.

Tk-804.031_500 release (2013-11-17)
----------------------

Fixes
 88210: fix compilation for perl 5.19.0+ ("undef bool").

 90077: floating number issue with -textvariable variables.

 89621: avoid segfaults during global destruction (by Gisle Aas).

 87016: compatibility for libpng 1.6.x.

 86988: use cflags/libs information from pkg-config zlib.

 89261: split Tk/ColorEditor.pm into three .pm files.

 71718: fix compilation issue with 64bit Strawberry Perl (Tk_Cursor).

 Fail gracefully if no font could be allocated.

 ptksh: storing the history works now also under Windows.

 Better handling if libpng's configure fails.

Documentation
 Changes to README.linux (dependency requirements, fontconfig) and
 README.cygwin.

 Document special Tk::Table behavior regarding -takefocus => 0.

Tests
 New test files (eventGenerate.t, sv.t) and new test cases
 (eventGenerate in optmenu.t).

 More test tweaks (e.g. skip some tests if the required fixed font is
 unavailable, see with_fixed_font in TkTest.pm, workaround some fvwm2
 problems in wm-tcl.t, protect from haning wm-time.t).

 checked_test_harness() skips testing if no font could be allocated.

 No test request user positioning windows anymore (for old window
 managers like twm).

 Configuration file for travis-ci.

Remove pkgviews: don't set PKG_INSTALLATION_TYPES in Makefiles.

Remove SVR4_PKGNAME, per discussion on tech-pkg.

Update homepage URL.

Bump for perl-5.20.0.
Do it for all packages that
* mention perl, or
* have a directory name starting with p5-*, or
* depend on a package starting with p5-
like last time, for 5.18, where this didn't lead to complaints.
Let me know if you have any this time.

Changes Tk-804.031:
This is basically the same like Tk-804.030_502.

Bump all packages for perl-5.18, that
a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package

Like last time, where this caused no complaints.

Recursive bump for png-1.6.

two more missed jpeg revbumps

Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.

Bump all packages that use perl, or depend on a p5-* package, or
are called p5-*.

I hope that's all of them.

Don't use -print0 / -0 in find | xargs, it works well without it.

Use ${RM} -f to avoid failure if no files are found to be removed.

Updated x11/p5-Tk to 804.030

Tk-804.030 release (2011-10-20)
------------------

This is basically the same like Tk-804.029_502.

Tk-804.029_502 release (2011-10-17)
----------------------

Fixes
 RT #71718: windres call needs the --use-temp-file on some Windows systems

 RT #70429: show correct file name if image loading failed. Also
 systematically searched and fixed other bad uses of Tcl_AppendResult.

 RT #70423: provide inuse method for Tk::Image

 Fixed a possible segfault when using canvas' select clear method.

Tk-804.029_501 release (2011-10-14)
----------------------

Fixes
 Use standard libpng configure for all amd64 and x86_64 variants.

 Support gridRemove method.
 https://rt.cpan.org/Ticket/Display.html?id=65900

Tk-804.029_500 release (2011-06-13)
----------------------

Fixes
 Fixed compilation with newer X11 version (conflicting types for
 'XKeycodeToKeysym')
 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613188

 Use standard libpng configure for some 64 bit variants of OpenBSD,
 amd64-freebsd, x86_64-linux, MacOSX 10.6.4 and newer.

 Fixed Strawberry 64bit builds.

 Changed handling of "underscore" character.
 https://rt.cpan.org/Ticket/Display.html?id=66205

 Tk::ProgressBar::configure calls now go through ConfigChanged
 https://rt.cpan.org/Ticket/Display.html?id=63775

 Fixed Tk::FBox::ResolveFile with defaultextension when directory
 contains dots
 https://rt.cpan.org/Ticket/Display.html?id=55146

New features
 BalloonInfo for HList
 Implementation by Christoph Lambrecht, documentation by
 Slaven Rezic
 https://rt.cpan.org/Ticket/Display.html?id=55887

 Perl/Tk is now available at github.

 Improved "all widgets at a glance" demo.

Tests
 Another attempt on skipping tests if no DISPLAY is available.

 Converted fork.t and progbar.t to Test::More

Documentation
 Fixed SYNOPSIS section in Tk::Text Pod

Revision bump after updating perl to 5.14.1.

add more REPLACE_PERL

png shlib name changed for png>=1.5.0, so bump PKGREVISIONs.

Mechanically replace references to graphics/jpeg with the suitable
alternative from mk/jpeg.buildlink3.mk

This allows selection of an alternative jpeg library (namely the x86 MMX,
SSE, SSE2 accelerated libjpeg-turbo) via JPEG_DEFAULT=libjpeg-turbo, and
follows the current standard model for alternatives (fam, motif, fuse etc).

The mechanical edits were applied via the following script:

#!/bin/sh
for d in */*; do
  [ -d "$d" ] || continue
  for i in "$d/"Makefile* "$d/"*.mk; do
    case "$i" in *.orig|*"*"*) continue;; esac
    out="$d/x"
    sed -e 's;graphics/jpeg/buildlink3\.mk;mk/jpeg.buildlink3.mk;g' \
        -e 's;BUILDLINK_PREFIX\.jpeg;JPEGBASE;g' \
        < "$i" > "$out"
    if cmp -s "$i" "$out"; then
      rm -f "$out"
    else
      echo "Edited $i"
      mv -f "$i" "$i.orig" && mv "$out" "$i"
    fi
  done
done

Update to 804.029. Test failures:
Failed 67/71 test programs. 3/4212 subtests failed.

But at least this version compiles, in contrast to the previous one.

Tk-804.029 release (2010-05-27)
------------------

This is basically the same like Tk-804.028_503.

Tests
 after.t is a TODO test on Windows.

Tk-804.028_503 release (2010-05-13)
----------------------

Fixes
 Tk::Text documentation mentioned -reverse where it should be -backwards.
 Also allow -forwards/-backwards to be abbreviated in FindNext call.

 Added WRITE method for tied Text widgets.

 Fixed display of Unicode characters in Windows toplevel menus.

 No special LDDLFLAGS handling on MacOSX systems, which probably
 caused an unusable Tk module (i.e. bus errors)

 Fixes Strawberry Perl builds (probably was broken on all 64bit systems)
 Informal patch by Eduard Wulff

Tests
 A missing rgb.txt is no more an error in the Tk::ColorEditor tests,
 as rgb.txt may be missing completely in some X11 installations.

Documentation
 Fixed minor typo in ProgressBar documentation

 Documented that -width and -height do not work with NoteBook widgets

Tk-804.028_502 release (2010-01-30)
----------------------

Fixes
 Support for perl 5.11.2 and later (UTF8_MAXLEN_UCLC is not available
 anymore)

 Use 'configure' for building libpng under IRIX64

 PNG did not build under AIX and IRIC64, unchecked fix

 Workaround for a perl bug (?) when using "eq" under a Japanese locale
 under Windows (sample fail report:
 http://www.nntp.perl.org/group/perl.cpan.testers/2008/11/msg2550386.html)

 Tk did not support more than 32 fds on 64bit machines

 Tk::Trace fix to make Tk::Gauge work

 Fixed some regular expression-related and other errors, patch by
 Alexander Krasnorutsky, see

 Workaround for SvREADONLY issue with 5.8.x

 Another possible rgb.txt location, by h.m.brand

 Fix for attaching balloons to items of scrolled widgets
 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=246363

 Fixed XIM event filtering.

 Fixed compilation with newer gcc

 RecolorTree was broken since Tk-804.027_501 if called separately.
 Reported and patched by Michael Parker

 Control-X/Y/C now also works if Caps Lock is active
 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=205895

 Copy/paste operations between KDE and Perl/Tk applications
 on 64bit system did not work, patch by Petr Pajas

 Canvas grids: -color was documented, but only -fill was implemented.
 In future both is supported.

 Patch for mingw-w64 gcc compiler, supplied by kmx

Documentation
 Documentation on "Perl/Tk and Unicode"

 Fixed cget/delete confusion in Entry.pod

Tk-804.028_501 release (2008-11-04)
----------------------

Fixes
 File permissions of the tarball seemed to be problematic under
 Windows Vista and Strawberry Perl 5.10.0.3, causing aborted builds.
 This is hopefully fixed now.

 Changed cygwin default to x11 (native MSWin32 port still does not
 work).

New
 There's now an "examples" directory containing some useful scripts
 previously been elsewhere in the distribution.

Documentation
 Documented ROText key bindings.

 New README for Strawberry Perl.

Tests
 Prevent Event mini tests to be run when the rest of Tk is not tested,
 to avoid insignificant PASSes at cpantesters.

 More tests marked as TODO or SKIP.

Tk-804.028_500 release (2008-10-01)
----------------------

Fixes
 Security fix for GIF reader (CVE-2006-4484, report and patch by
 Anicka Bernathova)

 Make sure Tk::MsgBox is not displayed before calling Show()

 Solved problems with fileevent on 64bit architectures (this also
 fixes a problem with POE)

 Makefile.PL updates (auto-creation of META.yml, added LICENSE, exit
 cleanly if prereqs are missing --- this is for cpan testers)

 Fixed typo in Tk::FBox

 Added different location of rgb.txt on Mac OS X 10.5.1 systems

 Fixed a makedepend issue, reported by marek.rouchal


 Fixed Tk::ColorEditor problem with OpenBSD (another rgb.txt location)

 clipboardGet was documented, but did not work (note that clipboard("get")
 always worked)

 Tk::After::Cancelled needs also a dummy cancel() method

 Fixed event handling for newer X servers


 Support for changed regexp-related functions and structures in perl
 5.11.x.

 Fix for: Tk::FileSelect fails to select file with "'" in file name
 (with new fileselect.t tests)

 Fixed movement of cursor on insertations in Tk::TextUndo

 Tk::Test fix for: skips lines when arrowing down in a window not
 exactly sized to a text

 ErrorDialog fix for Windows (dialog was never displayed)

 Use 'configure' for building libpng under Solaris.

Tests
 Tests for signal handling (testing LangAsyncCheck introduced earlier)

 Various skips and $TODOs for broken (?) window managers and slow
 connections (for example -xscrollcommand-related, floating-point
 precision-related, signal availability and many more ...)

Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.10.1 -> 5.12.1.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=..."), minus the packages updated after
the perl package update.

sno@ was right after all, obache@ kindly asked and he@ led the
way. Thanks!

Bump PKGREVISION for libpng shlib name change.
Also add some patches to remove use of deprecated symbols and fix other
problems when looking for or compiling against libpng-1.4.x.

Fixing PLIST by removing '*.orig' relics from patch stage

Second try at jpeg-8 recursive PKGREVISION bump.

bump revision because of graphics/jpeg update

cosmetic reordering

Deal with the new "GenericEvent" X event.  This fixes the same bug in
x11/p5-Tk that tk-8.4.18nb1 fixed in x11/tk.

Update to 804.028

Various bugfixes including fix building with perl 5.10.

Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.8.8 -> 5.10.0.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=...").

The package supports installation to DESTDIR.
A C compiler is required.

Fix buffer overflow vulnerability in p5-Tk derived from old code (CVE-2006-4484).
Approved-by: joerg

Reset maintainer -- shell@ is inactive.

MAKE_JOBS_SAFE=	no

Modular Xorg support.

Bump BUILDLINK_ABI_DEPENDS.png and PKGREVISION for png-1.2.9nb2 update.

Fix the right files.

Fixed the path to the Perl interpreter. Bumped PKGREVISION.

Recursive revision bump / recommended bump for gettext ABI change.

Fix errno and linkage on DragonFly. Fix dependency detection problem
on DragonFly, it needs to pickup png.h correctly.

Fixed pkglint warnings. The warnings are mostly quoting issues, for
example MAKE_ENV+=FOO=${BAR} is changed to MAKE_ENV+=FOO=${BAR:Q}. Some
other changes are outlined in

    http://mail-index.netbsd.org/tech-pkg/2005/12/02/0034.html

Bump the PKGREVISIONs of all (638) packages that hardcode the locations
of Perl files to deal with the perl-5.8.7 update that moved all
pkgsrc-installed Perl files into the "vendor" directories.

Turn PERL5_PACKLIST into a relative path instead of an absolute path.
These paths are now relative to PERL5_PACKLIST_DIR, which currently
defaults to ${PERL5_SITEARCH}.  There is no change to the binary
packages.

Massive cleanup of buildlink3.mk and builtin.mk files in pkgsrc.
Several changes are involved since they are all interrelated.  These
changes affect about 1000 files.

The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk.  bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files.  Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred.  This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.

The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages.  Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc.  This modification is a nod toward LOCALBASE=/usr.  The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.

The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc.  The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.

The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files.  Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories.  These files are used as input
to imake since imake can't use stdin for that purpose.

The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead.  This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed.  Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries.  Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.

Remove USE_BUILDLINK3 and NO_BUILDLINK; these are no longer used.

Remove FreeBSD RCS Ids. pkgsrc has diverged too much for syncing to be
useful.

Pullup ticket 297 - requested by Lubomir Sedlacik
security fix for p5-Tk

Revisions pulled up:
- pkgsrc/x11/p5-Tk/Makefile		1.42
- pkgsrc/x11/p5-Tk/distinfo		1.9
- pkgsrc/x11/p5-Tk/patches/patch-ac	1.1
- pkgsrc/x11/p5-Tk/patches/patch-ad	1.1
- pkgsrc/x11/p5-Tk/buildlink3.mk	1.2

    Module Name:    pkgsrc
    Committed By:   wiz
    Date:           Sat Dec 25 14:00:10 UTC 2004

    Modified Files:
            pkgsrc/x11/p5-Tk: Makefile distinfo
    Added Files:
            pkgsrc/x11/p5-Tk/patches: patch-ac patch-ad

    Log Message:
    Update to 804.027nb2: use png and jpeg packages instead of copies
    coming with the source. Patch from Michael van Elst in PR 28770.
    ---
    Module Name:    pkgsrc
    Committed By:   wiz
    Date:           Sat Dec 25 14:02:30 UTC 2004

    Modified Files:
            pkgsrc/x11/p5-Tk: buildlink3.mk

    Log Message:
    Recommend 804.027nb2 because of security problems in earlier versions.

Update to 804.027nb2: use png and jpeg packages instead of copies
coming with the source. Patch from Michael van Elst in PR 28770.

since perl is now built with threads on most platforms, the perl archlib
module directory has changed (eg. "darwin-2level" vs.
"darwin-thread-multi-2level").

binary packages of perl modules need to be distinguishable between
being built against threaded perl and unthreaded perl, so bump the
PKGREVISION of all perl module packages and introduce
BUILDLINK_RECOMMENDED for perl as perl>=5.8.5nb5 so the correct
dependencies are registered and the binary packages are distinct.

addresses PR pkg/28619 from H. Todd Fujinaka.

Enable pkgviews installation.

Perl/Tk updated to 804.027.

Changes unknown but appears to fix PR pkg/25066.

bl3ify

HOMEPAGE was incorrect, pointing to non-existant page.
Correct page: http://cpan.uwinnipeg.ca/htdocs/Tk/Tk.html

Update to 804.026:
This a re-port of a perl interface to Tk8.4.
C code is derived from Tcl/Tk8.4.5.
It also includes all the C code parts of Tix8.1.4 from SourceForge.
The perl code corresponding to Tix's Tcl code is not fully implemented.

Perl API is essentially the same as Tk800 series Tk800.025 but has not
been verified as compliant. There ARE differences see pod/804delta.pod.

The goal of this release is Unicode support via perl's and
core-tk's use of UTF-8.
Tk804.026 builds and loads into a threaded perl but is NOT
yet thread safe.

This Tk804 is only likely to work with perl5.8.0 or later.
Perl's UTF-8 support has improved since it was introduced in perl5.6.0.
Some functions (regular expression match in Text widgets) are known
to only work with perl5.8.1 and later

There are a lot more tests in Tk804. Some notably t/entry.t and
t/listbox.t very dependant on the available fonts and to a lesser
extent the window manager used. (See below for a list of fails
which can be "expected" even if nothing is really wrong.)

Others t/JP.t and t/KR.t need oriental fonts and can take a long time to
run on a machine with a lot of fonts but which lacks the glyphs tests are
looking for.

Move WRKSRC definition away from the first paragraph in a Makefile.

s/netbsd.org/NetBSD.org/

Place WRKSRC where it belongs, to make pkglint happy; ok'ed by wiz.

Use perl5/module.mk.

buildlink1 -> buildlink2

- Corrected WRKSRC
- change my email address
- fmt on DESCR

distfile renamed to Tk-800.024

Updated p5-Tk to 800.024 (provided by Shell Hung in pkg/15875)

- lots of buges fixed
- changes for compatibility with perl-5.7.3 and later
- contains re-worked Image code based on tcl/tk Img extension

Updated to 800.023 (PR#14569 by Shell Hung)

Changes in Tk800.022
- Fixes for NoteBook and LabFrame
- Various tweaks for "compile" to flat script (tool not released yet)
- Doc patches
- Slaven's -offset fixes and associated need to change compiled-in defaults.
- Feature suggestions from the list.

Buildlinkify.

I am a triple idiot.  The only relevant variable that x11.buildlink.mk
redefines about which buildlink.mk files would care is BUILDLINK_X11_DIR,
which points to the location of the X11R6 hierarchy used during building.
If x11.buildlink.mk isn't included, then BUILDLINK_X11_DIR defaults to
${X11BASE} (set in bsd.pkg.mk), so its value is always safe to use.  Remove
the ifdefs surrounding the use of BUILDLINK_X11_DIR in tk/buildlink.mk and
revert changes to move x11.buildlink.mk before the other buildlink.mk files.

Strongly buildlinkify.

SVR4 packages have a limit of 9 chars for a package name.
The automatic truncation in gensolpkg doesn't work for packages which
have the same package name for the first 5-6 chars.
e.g. amanda-server and amanda-client would be named amanda and amanda.
Now, we add a SVR4_PKGNAME and use amacl for amanda-client and amase for
amanda-server.
All svr4 packages also have a vendor tag, so we have to reserve some chars
for this tag, which is normaly 3 or 4 chars. Thats why we can only use 6
or 5 chars for SVR4_PKGNAME. I used 5 for all the packages, to give the
vendor tag enough room.
All p5-* packages and a few other packages have now a SVR4_PKGNAME.

Add -Wl,-R${X11BASE}/lib to the link command when making Tk.so.  This
allows us to find libX11.so at run-time in the correct place.

Use wildcard dependence on "p5-HTML-Parser" package.

Mechanical changes of tk DEPENDS:

	tk-8.3.2  -> tk>=8.3.2
	tk-[0-9]* -> tk>=8.0
	tk-8.*    -> tk>=8.0

Change BUILD_DEPENDS semantics:
first component is now a package name+version/pattern, no more
executable/patchname/whatnot.

While there, introduce BUILD_USES_MSGFMT as shorthand to pull in
devel/gettext unless /usr/bin/msgfmt exists (i.e. on post-1.5 -current).

Patch by Alistair Crooks <[email protected]>

Update to new COMMENT style: COMMENT var in Makefile instead of pkg/COMMENT.

Adapt this package to tk-8.3.2.

Hey, at least the python people put their money where their mouth is --
*I* sure don't use p5-Tk.... <duck> :-) :-) :-)

Ok, I'll shut up and have another cup of coffee now...

Update p5-Tk to 800.022.  This is the port of the perl interface to
Tk-8.0.5.  Changes from p5-Tk-402.002 are too numerous to list, as it
targets a different version of Tk.

Don't build "blib" perl module to avoid conflict with "perl5" package.

Fix dependence:
The module is called "Parser.pm" not "Parse.pm" and it is part of the
"p5-HTML-Parser-2.22" package.

add USE_X11=yes

Completely replace "MASTER_SITE_SUBDIR" and "PATCH_SITE_SUBDIR" with
variable substituition of "MASTER_SITES" and "PATCH_SITES".

Update to tk version 8.0.5. This seems to be primarily a bug-fix release.

The Grand Homepagification:
	- New, optional Makefile variable HOMEPAGE, specifies a URL for
	  the home page of the software if it has one.
	- The value of HOMEPAGE is used to add a link from the
	  README.html files.
	- pkglint updated to know about it.  The "correct" location for
	  HOMEPAGE in the Makefile is after MAINTAINER, in that same
	  section.

Update package Makefiles for automatic manual page handling.

Move to relative paths in the pkgsrc tree.

Remove the old deprecated DEPENDS definition from bsd.pkg.mk.
Implement a new DEPENDS definition, which looks for an installed
package, building it if not present, and use it in preference to
LIB_DEPENDS.  This should make the package collection more useful on
NetBSD ELF ports.

Substitute all obvious FreeBSD ppl as MAINTAINER with [email protected].

Use the bsd.pkg.mk and bsd.pkg.subdir.mk files in the pkgsrc tree.
Remove redundant (and sometimes erroneous) comments.

Modify individual package Makefiles to use the new way of specifying
shared object dependencies (LIB_DEPENDS).

portlint: fix RCS Id, remove empty line

Fix RCS Id, MI/MD PLIST

GUI for perl

Initial revision